Cliquez sur l'image pour voir l'oeuvre
Par Certification 
La description
Electric Cartridge Heating Element with Terminal is mainly used for efficiently heating tools and workpieces. To this effect, the heating cartridges are pushed into a hole in the tool and fixed there. Different diameters and designs make sure that the temperature distribution matches the specifications as well as possible.
Specifications are laser lettered at Electric Cartridge Heating Element with Terminal,such as voltage and power.It is to facilitate customers to distinguish between the voltages,to avoid damage to the heaters caused by voltage error.
There are two kind of end for the Electric Cartridge Heating Element with Terminal: SM female end heating head and SM Male end extension cable.
Fiche technique
Diamètre |
de 3,0 mm à 30 mm ; |
Tolérance de longueur |
± 2 percent or 3.2mm (1/8"), whichever is greater |
Tensions disponibles |
12V-480V or as customer's demand |
Tolérance de diamètre |
Le diamètre à chaque extrémité peut varier plus 0.05mm -0.1mm ( plus .002 -.004) |
Thermocouple interne |
type J ou K; |
Emplacement du thermocouple |
Extrémité du disque, gaine, centre de l'élément chauffant ; |
Courant de fuite maximum (froid) |
Inférieur ou égal à 0.5 mA ; |
Tolérance de résistance |
plus 10 % , -5 % |
Tolérance de puissance |
plus 5 pour cent , -10 pour cent |
Densité de puissance |
haut/moyen/bas(5-25w/cm2) |
Matériau de la gaine |
SUS 304/316L/201 Incoloy 800 |
Zone froide standard |
5-10mm |
http://fr.etdzheater.com/
